With the release of Mac OS X 10.5
Leopard, I figured it would be
fitting to write about the Blue
& White G3 as the oldest supported Macintosh in Apple's lineup -
well, under OS X 10.4 Tiger.
The FireWire module is a separate
component on the logic board.
When it was introduced in 1999, it matched the color styling of the
iMac. It introduce FireWire to the Mac, but it was technically on an
expansion card, not integrated with the logic board. It also introduced
USB to the professional Power Mac line, dropped the floppy entirely,
and introduced the industry standard VGA port to the desktop Mac. It wasn't the
first Mac to accept a gigabyte of RAM - that was the Power Macintosh 8500, introduced way back in
1995.
Other than dropping the floppy, it also did away with built-in SCSI,
something the Mac had since the Macintosh
Plus in 1986. The Lombard PowerBook
G3 would be the last Mac with SCSI built in, and built-in SCSI on the
Mac died in 2000 when Apple introduced the Pismo Powerbook G3. However, there was an option
on higher end B&W G3s for a SCSI PCI card, but this ate up a
precious expansion card slot.
One thing I should note is that there was a silent revision for
this machine. The earlier motherboards used a lower quality IDE
controller for the hard drives (the optical/Zip drive used a separate
controller, which was better quality). If you used a master/slave
configuration on the primary controller, you could end up with
corrupted data. The Revision 2 motherboards fixed this. You can tell
the difference between the two boards because the 2nd revision's IDE
chip (located by the PCI card openings) has "402" on it. The Rev. 2
machines also shipped with a different drive bracket for the first hard
drive bay (there are three of them in the machine), which allowed it to
hold two drives, one on top of the other, and a double connector IDE
cable.
Other options for this beast included your choice of a CD-ROM drive,
a DVD-ROM drive (something new at the time), or the odd man out DVD-RAM
drive (it was very slow). In order to watch DVD movies, Apple offered a
hardware DVD decoder that "piggybacked" on to the ATI Rage 128 card,
which included an at the time generous 16 MB of VRAM. You could even
order a Zip 100 drive for your B&W G3, sort of a floppy
replacement.
In terms of what operating systems this machine can run, it is
second only to the venerable Macintosh Plus in its range of official
Apple OS support. When it came out, Apple included a copy of Mac OS
8.5.1. Later machines shipped with Mac OS 8.6. These were some of the
first New World machines (second only to the original iMacs). They can run Mac OS X
10.0 all the way up to the latest and greatest version of Tiger, Mac
OS X 10.4.10. That's an incredible 8 years of Mac OS support. And
because they have a New World ROM, if Linux is your thing, it's really
easy to install.
What about my machine? It's my main workhorse. I have had it
almost two years now, since December 2005. I have run a number of
operating systems on it. First I ran Ubuntu Linux 5.10. Then Mac
OS 9 for six months. I then had Ubuntu 6.06 on it, then Mac
OS X 10.3 for a week, and finally Mac OS X 10.4 for a year
now. Running the same installation for a full year is incredible.
My B&W G3 is also quite tricked out. Has a 120 GB hard drive
(the closest I could get to the 128 GB
hard drive limit without wasting space), a 4+1 USB 2.0 PCI card, an
overclocked 350 MHz G3 running at 400 MHz, a DVD-ROM/CD-RW "combo"
drive, and my latest addition - 1 GB of RAM. I have also snagged
one of those nice matching model M4551 LCDs with the video inputs for
it, and it plugs in to the B&W's power supply, saving a plug. I
also added a Zip drive, but it doesn't match the machine. I have no
faceplate for the Zip drive, but it works. It is also on it's second
motherboard, both of which are unfortunately Revision 1.
My future plans are to purchase a 1 GHz G4 upgrade for it so I can
hopefully run Leopard (about the same price as a compatible G4 machine right now,
and it's faster). I also want a revision 2 motherboard for it, and
possibly replace the side panels, because they are cracked in a few
places. After that, I think I will have a great machine for at least
another five years.
I would say these are just about the perfect Mac. Great long OS
support (they were six years old when Tiger came out), are easily
overclockable, and can handle just about anything you can throw at
them. Plus the blueberry plastics give it a touch of that original iMac
charm.
I highly recommend them for anyone who wants to run Tiger and don't
need the latest and greatest. If you're looking at running two internal
hard drives, pick up a Rev. 2 machine. They
can be had for very cheap nowadays. I got mine for $60 shipped in
2005, and I imagine they are even cheaper now.
