Questions I get asked fairly frequently are variations on the
general theme of upgrading the operating systems of older Macs to more
recent system versions. There is no all-purpose boilerplate answer. The
appropriate system to use depends on variables like the speed of your
machine, how much RAM you have, what you use the computer for, and how
much performance (speed again) you're willing to trade off in order to
have the latest bells and whistles.
There is also the matter of support. For example, PowerBooks prior
to the G3 Series
WallStreet, which was introduced in May 1998, are not supported by
OS X, which means that the
original 250 MHz PowerBook G3 (3500/Kanga) has the dubious
distinction of being the only G3 model Apple ever made that isn't
supported by OS X. If you're really determined, you can probably
get OS X to install on a Kanga using Ryan Rempel's XPostFacto
installer hack for some unsupported Macs, but is it worth the trouble
on a Mac limited to 160 MB of RAM? I'm doubtful.
On the Classic Mac OS side, there is Mac OS 9.2.2, which only
officially supports the same machines that OS X does. It seems
that a lot of people with older Macs are interested in installing OS
9.2.2, and again, there is an installer hack available (OS 9 Helper) that
help them to do so. But is it a wise idea? Not always, in my
estimation.
The newest officially supported system is often
not the ideal one to use.
The newest officially supported system is often not the ideal one to
use. For instance, OS 9.1 is supported by the PowerBook 5300, and Duo 2300, but you won't be very
happy with the performance on these 100 MHz and 117 MHz PowerPC 603e
computers - or for that matter on the 117 MHz PowerBook 1400.
In this column I will outline what Mac OS versions are supported by
which PowerBook and iBook models back as far as the 680x0-based
190 and 500 series and offer my suggestions
as to which I think is the ideal OS for each model. I'm sure there will
be those who disagree with my picks in some cases, but here are my OS
picks model by model.
Intel 'Books
All Intel MacBook, MacBook Air, and MacBook Pro models
This one is a no-brainer. Run the latest version of OS X 10.5
"Leopard" (currently version 10.5.4) and be happy.
G4 'Books
Aluminum PowerBook G4 and G4 iBook (1.33 GHz to 1.67 GHz)
Not as much a no-brainer, especially at the lower end of the clock
speed range. Leopard is supported decently. The machine I'm typing this
on right now is a 1.33
GHz PowerBook G4, and it supports Leopard reasonably well, albeit
with less than scintillating performance. OS X 10.4.11 "Tiger"
will be more lively and more gracefully supported on these last and
fastest G4 'Books, but I find some of the features in Leopard - notably
Spaces, Time Machine, and QuickLook - just too cool to live without if
I don't have to.
My suggestion here is that if you have 1.25 GB of RAM or better,
Leopard is well worth seriously considering. With less memory than
that, I would find it too compromised. I have 1.5 GB and wish I had
2 GB in my PowerBook.
Aluminum PowerBook G4 and G4 iBook (867 MHz to 1.25 GHz)
These machines are officially supported by OS X 10.5, but it would
not be my ideal choice; I would go with OS X 10.4.11. If you do
decide to run Leopard, load up with as much RAM as you can afford.
800 MHz iBook G4
The 800 MHz iBook
G4 is the newest 'Book that doesn't make the Leopard cut, although
you can hack the installer
to make it work. Use OS X 10.4.11.
Titanium PowerBook G4 (667 MHz to 1 GHz)
These are the newest PowerBooks that will dual-boot OS X and OS
9.2.2. I recommend OS X 10.4.11 with at least 512 MB of RAM.
Titanium PowerBook G4 (400 to 550 MHz)
The first two generations of the titanium PowerBook inherited the
Pismo's 8 MB of video RAM, so they won't support Quartz Extreme.
That limitation noted, go with OS X 10.3.9 "Panther" on the
400 MHz machine and
10.4.11 on the 500 MHz and 550 MHz models.
G3 'Books
Dual USB iBook G3 (500 to 900 MHz)
Max out the RAM at 640 MB and run OS X 10.4.11, or use OS 9.2.2 and
you can get along with less memory.
Pismo PowerBook G3 (400 and 500 MHz G3 or 500 to 500 MHz G4
upgraded)
I'm running Mac OS X 10.4.11 on my 550 MHz G4 Pismos (with 640 and 384 MB
RAM). These computers are in regular use for production work, and I am
quite pleased with Tiger's performance. Note however that OS X
Quartz Extreme graphics acceleration is not supported by the Pismo's
Rage Mobility 128 graphics card with its paltry 8 MB of video
RAM.
I was also pleasantly surprised by how lively Tiger was on the most
recently acquired Pismo with the 500 MHz G3 processor it came with
(before I installed the 550 MHz G4 upgrade). Performance would be
better with a gig of RAM, but I'm satisfied enough with what I've got
that I haven't moved on that. For a 400 MHz G3 Pismo I would suggest OS
10.3.9 Panther.
And of course The Classic Mac OS 9s just fly on any Pismo model.
FireWire Clamshell iBook (366 and 466 MHz)
I would go
with Mac OS X 10.3.9 with the 366 MHz unit (even though
it is supported by Tiger) and OS X 10.4.11 with the 466 MHz - or OS 9.2.2 with
either.
Early Clamshell iBook (300 and 366 MHz)
These iBooks will support up to OS X 10.3.9, which would be my
OS X version of choice, but the 300 MHz model especially
will be a lot happier camper in Mac OS 9.2.2.
Lombard PowerBook G3 (400 and 500 MHz)
I consider the
Lombard the threshold
machine for reasonable OS X performance unless you have one of the
rare Daystar G4 433 MHz upgrades, in which case I would recommend
OS X 10.3.9. You can run up to OS X 10.3.9 on a 333 MHz
Lombard, but you'll find it pretty sluggish. A 400 MHz unit - or a 500
MHz G3 or a G4 upgraded Lombard - will give you decent OS X
performance in Panther, but the 8 MB of video RAM and mediocre
graphics card in these machines hobbles Finder responsiveness.
Mac OS 9.1 or 9.2.2 will give you lots of speed on a Lombard.
WallStreet PowerBook G3 Series (233 to 300 MHz)
WallStreet was
available in 233 (no cache), 233 (512 KB cache), 250, 266, 292, and 300
MHz versions, and it could also be upgraded to 500 MHz G3 or G4 power.
It is the oldest PowerBook officially supported by OS X (up to
OS X 10.2.8 "Jaguar") and will run all Classic Mac OS versions
from 8.1 through 9.2.2. My favorite system for my 233 MHz (512 KB
cache) WallStreet was OS 9.2.2 .
As for OS X, my personal recommendation would be to stick with the
OS 9s unless you have a 500 MHz G3 or a G4 processor upgrade installed
on the WallStreet. The 292 MHz and 300 MHz units will give you
marginally tolerable performance in OS X if you're very patient Some
folks profess to be happy with running X on 233 MHz-266 MHz
WallStreets, but I wouldn't be. You will also want to max out your RAM
at 512 MB for running X on these machines.
PowerBook G3 3500/Kanga
The original PowerBook G3
is the only G3 Macintosh not officially supported by OS X. OS 9.1
would be my system of choice for this model, or perhaps 9.2.2 with a
hack install. XPostFacto should get OS X installed, but I
personally would not be interested in running OS X anything slower
than a 333 MHz Lombard with at least 512 MB of RAM.
PowerPC 603e 'Books
PowerBook 2400c
The little,
IBM Japan-designed and built PowerBook 2400 subnotebook had pretty
much the same motherboard architecture as the PowerBook 3400, but it
had its processor mounted on a removable daughter card and was thus
processor upgradeable. G3 upgrades were available for these machines.
Go with Mac OS 8.6, OS 9.1, or OS 9.2.2.
PowerBook 3400c
The 3400 originally shipped
with Mac OS 7.6, but these machines will comfortably support OS 8.6 and
up to 9.1, any of which will work well provided you have enough RAM
installed. You can apparently install OS X on a 3400 using
XPostFacto, but I would advise against it. The old 603e just doesn't
have the muscle to run OS X decently. However, OS 9.2.2 should run
fine via installer hack if you need it for application support.
Note that if you are installing Mac OS 9.1 on a PowerBook 3400
running Mac OS 9.04, you must perform the installation without updating
your hard disk drivers or your computer may stop responding during
installation. To prevent the Installer from updating your hard disk
drivers, click Options in the Install Software panel of the Mac OS 9.1
Installer and deselect the option to update your hard disk drivers.
PowerBook 1400
The
1400 was sold in 117, 133, and
166 MHz models and is also processor upgradeable to as fast as a 466
MHz G3, so one can't generalize about the ideal OS version for this
machine, which originally came equipped with System 7.5.5 or 7.6. For
the 117 MHz model, go with OS 8.1 or OS 8.6 (I have both installed on
my 117 MHz 1400 with 40 MB of RAM, but I use OS 8.6 most of the time,
and I think it's the most optimum compromise, although System 8.1 is
faster). The 133 MHz and 166 MHz models work well with OS 8.6, and if
you have your RAM maxed out, you may find that OS 9.0 or 9.1 will work
reasonably well, although I think OS 8.6 is still the best choice,
since the OS 9s want 40 MB of RAM just to support the system, and the
1400 is limited to 64 MB total RAM.
If you have a G3 processor upgrade installed in your 1400, you
certainly have the processor speed to support OS 9.1, a but the RAM
limitation still applies. If you only run a few applications at a time,
OS 9.1 will be satisfactory. If you need more RAM for running
applications, stick with OS 8.6 or even OS 8.1.
Incidentally, Password Security is not supported on PowerBook 1400s
with Mac OS 9.1. If you have Password Security installed on a PowerBook
1400, you should turn off password protection before installing Mac OS
9.1.
PowerBook 5300
The much maligned PowerBook
5300 came with System 7.5.2, which was the worst build of System
7.5. You should definitely upgrade to System 7.5.3 or 7.5.5 at minimum,
and those systems will get you the best speed performance out of a
5300, but this computer will support up to OS 9.1. I would suggest
going no higher than OS 8.6 with a 5300, and OS 8.1 will give you the
best compromise between speed and features on this model.
System 7.5.5 was largely a bunch of PowerBook 5300 reliability
patches added to System 7.5.3 and is recommended as the ideal System
7.5 version for these 'Books. I tried OS 8.5 on our 5300 and was not
happy with the performance (note, however, that we only had 24 MB of
RAM in that 5300). If you have more RAM in your 5300, you might want to
try up to OS 8.6, but I've found that System 7.5.5 or OS 8.1 seem to be
the most successful Mac OS X versions for the 5300.
PowerBook Duo 2300
What I noted above for the PowerBook 5300 pretty much applies to the
Duo 2300 as well.
Introduced along with the PowerBook 5300 and 190, the 2300 was the last
of the Duos and inherited much of the internal architecture of the
original 68030 Duo models, which hobbled its performance as a PowerPC
machine, making it even slower than the 5300, so System 7.5.5 is
probably the ideal choice.
68040 'Books
PowerBook 190
The 68040-based 190 was more or
less a PowerBook 500 in a PowerBook 5300 case in terms of performance.
For the best speed performance, go with System 7.5.3 or System 7.5.5 on
these machines, but OS 8.1 will give you support for HFS+ disk
formatting and is a decent performer as well.
PowerBook 500 series
The PowerBook 520 and
540, introduced in May 1995, were the first PowerBooks that in my
estimation could serve as one's "only" computer without imposing
substantial compromises. With their 25 MHz and 33 MHz 68LC040
processors, full-size keyboards, comprehensive array of ports, built-in
ethernet, optional built-in modem, and stereo speakers, the 500 offered
unprecedented power, versatility, and connectivity in a PowerBook form
factor. They originally came with System 7.5 installed and will support
up to OS 8.1. I would recommend the same systems as for the 190 series
for the 500s. 
